01937 580580
sales@oakbydesign.co.uk
Home > Products > Oak Profiles
"The finishing touches are just as important as the ones you start with..."
We manufacture our own lengths of skirting board, currently available in four different profiles.
Should your requirements be a little different we can normally satisfy most peoples needs.
Lengths are normally in excess of 2.0m and the norm tends to be 2.4m to 4.0m.
The height is 165mm although this can be reduced or increased if needed.
We also manufacture our own sets of architrave matching the four profiles of the skirting board.
Unless a double door opening is required, we supply sets of architrave allowing 2 legs and 1 head per set. This set will be able to be mitered on site to produce one side of one door.
The legs will have a length of at least 2.2m and the head 1.1m totaling 5.5m per side of a door.
Should your requirements be a little different we can normally satisfy most peoples needs.
The small detailing profile is used to finish areas where a floor meets either existing skirting board. Sometimes, the original skirting board cannot or does not want to be removed. As a floor requires an expansion gap around the perimeter of the room, the scotia bead hides this well.
Quadrants
Similar to a scotia bead except its profile is convex instead of concaved.
These important profile are used as threshold strips normally in doorways. It provides a matching piece of oak similar to the brass and silver bars used when carpets are used.
A reducing strip is commonly used to gradually allow our oak floors to flow onto another type of flooring ie carpet, laminate, or tiles.
A comprehensive account of a large nineteenth century barn conversion.
We show the construction over nearly 3 years of how oak products can be
used in such an environment.
Some amusing and true stories accompany this summary of the barn project.
Click here to read the story...
News
Follow us on Facebook
Join us on Linked In
We are a member of 